Kaco XP10U-H4 User Manual download pdf (Page 17)

Configuration and Operation

Operator Instructions blueplanet XPU H / H and XPU H / H PSD Page 

. Performing a software update

You can update the software of the inverter to a new version via the integrated USB interface. Us a FAT-formatted USB

stick to do this. Do not use any storage media, such as an external hard disk, with an external power supply.

NOTICE

Ensure that the power supply of the AC and DC sides is active. It is only possible to update all components

of the inverter to the most current software version in this operating state.

CAUTION

Damage to the inverter

The update can fail if the power supply is interrupted during the update process.

Parts of the software or of the inverter itself can then be damaged.

» Do not interrupt the DC and AC power supply during the update process.

Preparing for the software update

. Download the software update  le from the KACO web site and store it on your hard disk.

. Extract the update  le (.ZIP) completely onto the USB stick.

» Perform software update.

Perform software update.

↻ Prepare for the software update.

↻ Ensure supply of DC and AC power.

. Connect USB stick to the inverter.

» The message “Con guration found. Would you like to load it?” appears on the display.

. If you would like to perform the update, select the “Yes” button.

» The inverter begins the update.

The update can take several minutes. The “Operating” LED  ashes during the update process. The inverter may restart

several times. The update is completely loaded when the display screen shows the desktop.

The inverter then returns to feed-in mode. You can check the success of the update in the menu:

Display software version

 Open the Information/SW version menu

» The inverter will display the versions and checksums of the currently loaded software.

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Kaco XP10U-H4 User Manual Page 17