Kaco XP10U-H4 User Manual download pdf (Page 15)

Configuration and Operation

Operator Instructions blueplanet XPU H / H and XPU H / H PSD Page 

. Monitoring the inverter

The inverter has an integrated web server. This makes it possible to monitor and record the operating state and yield of

your PV system.

You can display the recorded data via:

• The integrated LCD

• The integrated web server using an Internet-capable device connected to the Ethernet interface of the inverter

You can read the recorded data using a storage medium connected to the USB interface of the inverter, e.g. a USB stick.

.. USB interface

Use an external USB storage device to read operating data saved in the inverter.

... Reading log data

NOTICE

The USB interface is approved solely for usage with USB  ash memories (“USB sticks”). The maximum

available current is  mA. If a device with a higher power requirement is used, the power supply for the

USB interface automatically shuts down to protect the inverter from damage.

Reading log data

. Connect a suitable USB storage device to the USB interface on the underside of the inverter.

. Open the “Log data view” menu.

. Select the “Save to USB” item.

. Select the desired log data using the -way key.

. Press the OK key.

» The inverter saves the selected log data to the USB storage device.

.. Web server

The inverter has an integrated web server. After con guration of the network and activation of the web server in

the con guration menu, you can open the web server from an Internet browser. The language version of the web site

delivered by the browser is dynamically adapted, based on the pre-set language preferences in your Internet browser. If

your Internet browser requests a language that is unknown to the inverter, the web server uses the menu language set in

the inverter.

... Setting up the web server

Con guring the Ethernet interface

↻ You have connected the inverter to your network.

. Open the Settings/Ethernet menu.

. Assign a unique IP address.

. Assign a subnet mask.

. Assign a gateway.

. Save your settings.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

No comments

Kaco XP10U-H4 User Manual Page 15